WeldRo’s PNME CUTTING NOZZLE are manufactured to original equipment manufacturer specification 76 mm long and 100% flame tested in Malaysia for guaranteed performance. WeldRo PNME Cutting Nozzle come in 9 Spline and 18 Spline which design to cater to different cutting application.
WeldRo PNME CUTTING NOZZLE FEATURES:
- Two piece design consisting brass inner nozzle and a hollow copper outer sheath
- Turbulence will be created between the inner and outer parts of the nozzle to obtain sufficient mixing of propane and oxygen
- The volume of mixed Oxy-Propane needs to be more than double that of Oxy-Acetylene for the same usable heat
- The extra volume is achieved by very large channels that are present on the brass inner nozzle which conduct the greater volumes of gas
WeldRo PNME- 9 Spline CUTTING NOZZLE:
- 88 mm Standard Cutting Nozzle Length
- 9 Spline PNME Cutting Nozzle design for hand cutting application with standard pre-heating of metal
- Maximum cutting thickness 300 mm
| PRODUCT CODE |
MIXED GAS |
SIZE |
CUTTING THICKNESS |
| K401/220 |
OXY-PROPANE |
1/32 |
6 MM |
| K401/221 |
OXY-PROPANE |
3/64 |
12 MM |
| K401/222 |
OXY-PROPANE |
1/16 |
75 MM |
| K401/223 |
OXY-PROPANE |
5/64 |
100 MM |
| K401/224 |
OXY-PROPANE |
3/32 |
150 MM |
| K401/225 |
OXY-PROPANE |
1/8 |
300 MM |
WeldRo PNME- 18 SPLINE CUTTING NOZZLE:
- 88 mm Standard Cutting Nozzle Length
- 18 Spline PNME Cutting Nozzle design machine torch application for faster preheat time
- Maximum cutting thickness 300 mm
| PRODUCT CODE |
MIXED GAS |
SIZE |
CUTTING THICKNESS |
| K401/210 |
OXY-PROPANE |
1/32 |
6 MM |
| K401/211 |
OXY-PROPANE |
3/64 |
12 MM |
| K401/212 |
OXY-PROPANE |
1/16 |
75 MM |
| K401/213 |
OXY-PROPANE |
5/64 |
100 MM |
| K401/214 |
OXY-PROPANE |
3/32 |
150 MM |
| K401/215 |
OXY-PROPANE |
1/8 |
300 MM |
